Traverse Electric carries Marathon Water Heaters with a lifetime Warranty. Heating your water with an electric water heater is simple and efficient. Marathon water heaters are non-metallic, which means your water heater will never rust out. The Marathon has at least three inches of polyurethane foam insulation around the entire tank - top, bottom, and sides!
An electric Marathon water heater offers many advantages over conventional electric, propane or natural gas units, such as:
-
A Marathon has a lifetime warranty on the tank. If the tank should ever spring a leak while at its' original point of installation, a replacement heater will be supplied at no cost for the new heater.
-
If the heater should spring a leak within 6 years of the date of manufacture, Marathon will also allow up to $100 on a plumbers invoice for swapping out the heater.
-
If an element or thermostat should fail within 6 years of date of manufacture of the heater Marathon will also allow up to $50 on a plumbers invoice for changing out the part.
-
With over 3 inches of Envirofoam insulation surrounding the tank, heat loss is kept to a minimum, cutting you water heating costs.
Member Pricing:
-
50 Gallon - $300 rebate available*
-
50 Gallon Short - $300 rebate available*
-
85 Gallon Grid Enabled - $510 rebate available*
-
100 Gallon Grid Enabled - $600 rebate available
-
Rebate available to qualified members only. Water heaters must be installed in a member's primary place of residence and under load control. One rebate per site. Members would also qualify for a $4.00 credit on monthly energy bill if total monthly kwh consumption is 700 kilowatts or more.
**please call 1-800-927-5443 for current water heater prices
Specifications:
Wattage Elements | Circuit Brk. (Amps) | Wire Gauge | Height | Diameter | ||
---|---|---|---|---|---|---|
MR50238 | 50 | 3800/3800 | 20 | 12 | 66.75" | 23.50" |
MSR50238 | 50 | 3800/3800 | 20 | 12 | 47.25" | 28.25" |
MR85238 | 85 | 3800/3800 | 20 | 12 | 70.25" | 28.25" |
MR105238 | 105 | 3800/3800 | 20 | 12 | 70.75" | 30.25" |
MR105245 | 105 | 4500/4500 | 30 | 10 | 70.75" | 30.25" |
Standard 240 Volt AC single phase. Maximum test pressure of 300 PSI. Maximum working pressure of 80 PSI. Height includes factory installed temperature and pressure relief valve.